1. Safety
YOUR SAFETY, AS WELL AS THE SAFETY OF OTHERS IS
IMPORTANT TO GBC. IN THIS INSTRUCTION MANUAL
AND ON THE PRODUCT ARE IMPORTANT SAFETY
MESSAGES. BEFORE YOU INSTALL OR USE THE
MACHINE, READ AND FOLLOW ALL THE SAFETY
NOTICES CAREFULLY IN THIS CHAPTER.
Observe all the safety information provided. Observe
all safety warnings. Never remove safety warnings or
other information from the equipment.
Read all of the instructions and save these
instructions for further use.
The safety alert symbol precedes each
safety notice in this manual. The symbol indicates a
potential personal safety hazard to you or others,
product damage or property damage.
This safety alert symbol indicates a
potential electrical shock. It warns you not to open
the punch and expose yourself to hazardous
voltage.
THE FOLLOWING WARNINGS ARE FOUND ON THE
MAGNAPUNCHHEAVY DUTY PUNCH.
This means you can be seriously hurt or killed if you
open the product and expose yourself to hazardous
voltage.
Do not open. No user serviceable parts insides. Refer
servicing to qualified service personal.
WARNING: Do not attempt to service or
repair the paper punch.
WARNING: Do not connect the paper punch
to an electrical supply or attempt to operate the
paper punch until you have completely read these
instructions. Maintain these instructions in a
convenient location for future reference.
General safeguards
•
Use this paper punch only for its intended
purpose, according to the specifications
outlined in the operating instructions.
Do not place the punch on an unstable cart,
stand or table. An unstable surface may
cause the punch to fall resulting in serious
bodily injury. Avoid quick stops, excessive
force and uneven floor surfaces when
moving the punch on a cart or stand.
•
Do not defeat or remove electrical or
mechanical safety equipment such as
interlocks, shields and guards.
•
Do not insert objects unsuitable for
punching.
•
Use only GBC Magnapunch Pro
and 2.0
interchangeable Die Sets with the
Magnapunch Pro.
•
Do not expose punch to liquids.
Electrical Safeguards
•
This punch must be connected to a supply
voltage corresponding to the electrical rating
as indicated on the rating plate located on
the rear of the machine.
•
Unplug the punch before moving it, or when
it is not in use for an extended period of
time.
•
Do not operate the punch with a damaged
power supply cord or plug.
•
Do not overload electrical outlets as this can
result in fire or shock.
•
Do not alter the attachment plug. This plug is
configured for the appropriate supply.
•
The unit is intended for indoor use only.
CAUTION: The socket outlet must be
located near the equipment and easily
accessible. Do not use an extension cord.
•
Disconnect the attachment plug from the
socket outlet to which it is connected and
keep the power supply cord in a safe place
while moving the punch.
•
Do not operate the paper punch with a
damaged power supply cord or attachment
plug, upon occurrence of a malfunction, or
after the punch has been damaged. Contact
an authorized GBC service representative for
assistance.
