19
6.0 DISASSEMBLY / ASSEMBLY / ADJUSTMENTS (Continued)
ADJUSTMENTS:
Refer to the Video entitled “Adjustments” as you review the following text.
Element Size Sensor
There are 3 size slots on the element size sensor, one for each size of element.
For example, when you insert a small element, the sensor should move to the small
position. When you remove the element, the sensor should return to its lowest
position. If it does not, loosen the Allan bolt into look false interposition.
Paper Lead Assembly
The two rails of the document tray should rest on the two rails of the paper lead
assembly. If they do not, loosen the 4 screws that hold the paper lead assembly.
Move it into position then turn the 4 screws.
SPINE HOLDER REPAIR:
Refer to the Video entitled “Spine Holder Repair” as you review the following text.
In order to repair the spine holder shaft you must follow these steps:
•
Hold the element size sensor in one of the size positions.
•
Insert any object into the document sizer.
•
Insert your document.
•
Two LED lights should come ON.
•
Press BIND.
•
Immediately lift open the cover, this will stop the binding process.
•
Press the safety switch until the springs are relaxed.
•
Turn the power OFF and unplug the machine.
•
Remove the safety switch cover on the left side of the machine.
•
Remove the 3 springs.
•
Remove the 2 E-clips.
•
Pull the element guide mount assembly to its outermost position.
•
For holding onto the spacer remove the spine holder shaft.
•
Push the element guide mount assembly to its innermost position.
•
To remove a spine holder press in the tab with a flat head screwdriver and
push up. Remove the spine holder.
•
To replace a spine holder slide the spine holder into position. Line up the
match in the front of the spine holder.
•
Push in the tab at the back with the screw driver and push it down into
position.
•
Pull the element guide mount assembly to its outermost position.
•
Put the spine holder shaft back in landed up with the guard cam assemblies
and the spacer.
•
Replace the 2 E-Clips.
•
Replace the 3 springs.
•
Replace the safety switch cover.
•
Plug in and power up the machine.
•
Lower the document tray and lower the cover.
•
The machine will go into a 4 reverse position.
•
LCD screen will pop you to open the cover and lift the document tray.
•
Then lower the document tray and close the cover.
•
The machine will reset and be ready for operation.
Summary of Contents for GBC Proclick Pronto
