gb PLATINUM Vaya Series, Manual, Page: 22 / 72

22
The SENSOR
SAFE
application shows the battery status of
the clip. Also the LED on the clip will flash ten times after
closing when the battery is running low. Please replace the
battery in time to be able to further use SENSOR SAFE .
To replace the battery please open the compartment located
at the rear of the clip with a screwdriver. After changing
the battery the clip can be seen in the SENSOR SAFE
application. In case you do not see it please check the status
of the battery.
Please consider the following when replacing the battery:
•
Keep all batteries out of reach of children.
• Only use the recommended type CR2032 batteries.
• An empty battery always has to be removed in order to
protect the product from escaping liquids.
• Never expose this product or the battery to fire.
• Do not use old batteries or batteries that show signs of
leakage or cracks.
• Only use high-quality new batteries.
• Pay attention to the correct polarity (+/–).
REPLACING THE BATTERY
CR2032