background image

 
 

 

 

 

2. Safety information, warnings

 

 

 

When  connected  in  a  correct  way  and  if  complying  with  the  instructions  for  use,  these  devices  are  not 
dangerous; electrical components contained therein are protected from access of water or dust inside the 
machine, against access to parts under voltage, or contact with parts under voltage. 

 

 

 
Important warnings! 
 
Persons with reduced physical, sensory and 
mental abilities or with insufficient knowledge 
and experience can use this device only if they 
have received adequate instructions concerning 
the safe use and if they understand the dangers 
associated with the use of the appliance. 
 
• WARNING: The appliance and some 
accessible parts of the appliance are very hot 
during operation. Be careful not to touch the 
heating elements. 
 
• WARNING: Risk of fire: Do not store any 
objects on the surface of the hob. 
 
• After use, turn the fryer off with the relevant 
control elements. 
 
In any operation switch turn switches of all 
cooking zones off and remove the fuse or switch 
off the main fuse so that the appliance 
completely disconnected from the electrical 
network. 
 
• CLEANING! Do not use hot steam devices or 
high-pressure cleaners, as this may result in an 
electric shock. 

• The appliance is not intended for the 
management of external programming hours or 
special monitoring system. 
 
• The appliance may only be connected by the 
manufacturer or an authorized specialist. 
 
• In the case of non-professional interventions 
and repair of the appliance there is a danger of 
serious bodily injury and damage to the 
appliance. Repairs can be carried out only by 
the manufacturer or an authorized specialist. 
 
• Do not use the device for any other purpose, 
for example; for space heating. 

 

• On or in device do not store flammable, 
explosive and temperature non-resistant 
objects (paper, wiping cloth, plastic bags, 
cleaning agents, and various sprays), whereas 
using the device could cause a fire. 

 

•  The  device  is  placed  directly  on  the  floor 
without the use of any kind of trays. 

 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

!WARNING:  The  user  shall  assume  all  responsibility  for  any  damages  resulting  from 
improper use.  

 
 

 

 

ELECTRICAL CONNECTION MUST BE CARRIED OUT BY A QUALIFIED PERSON!

 

 

 

PRIOR TO INSTALLING OR ANY INTERVENTION INSIDE THE DEVICE IT IS 
ABSOLUTELY NECESSARY TO READ THE INSTRUCTIONS FOR USE AND 
INSTALLATION!

 

 

 

 

IT IS FORBIDDEN TO PLACE ANY OBJECTS ON OR INTO THE DEVICE!

 

 

 

 

CONNECTION IS NEEDED EXECUTED WITHOUT POWER!

 

 

Summary of Contents for XEF463-207V
















Reviews: