12
EN
System installation order:
•
Mark and make mounting bores for the sensors in the rear bumper of the car.
•
Install the sensors in the bumper.
•
Install the central unit.
•
Connect the sensors to the basic wiring and continue the wiring to the location of the central unit.
•
Connect the power to the central unit.
•
Route the speaker extension cable to the speaker position.
•
Install the speaker.
Sensors installations:
•
The sensors are recommended to be installed in proper locations. Most carmakers are marking where to drill the sensor holes on
the back of the bumper.
•
If the marking is missing or the installation in proper locations is impossible for some reason, use the marking ruler that comes
in basic equipment.
•
With standard settings, the height of the sensors is 50-60 cm. The height of the installation can also be 40-50 cm or 60-70 cm,
these parameters can be adjusted with an optional programmer Gazer PAC30 and specialized software, separately for each sensor.
Installation recommendations
Important:
Do not install the sensors in a metal bumper, this will lead to the system shutdown.
H1
H2
S1
S2
S3
S4
H3
H4
Summary of Contents for PA40R
