14
EN
The procedure for connecting the sensors can be changed using an optional programming tool Gazer PAC30 and specialized software.
•
Secure the wiring with plastic ties.
•
Avoid hard tightening of the wires.
•
Avoid high current, surge and high voltage cables when laying the wiring. To ensure the integrity of the wiring should also avoid
the heated and moving parts of the car.
•
Make sure the cable outlet is hermetically sealed. For convenient output, a rubber gasket is provided on the protective cable ripple.
Remote loudspeaker installation:
•
The loudspeaker should be installed in the passenger compartment.
•
It is advisable to think through the installation site so that you can still access the speaker volume control.
•
The installation site must be selected in such a way that the warning signals are clearly distinguishable from the driver’s seat.
•
To connect the speaker, use the extension cord that is supplied with the system.
Power supply connection:
•
Black wire GND
– must be connected to the car body or to the ground braiding of the regular wiring of the car.
•
Red wire ACC
– must be connected to the accessories power supply (appears at the start of the engine and disappears when it is
turned off).
•
The orange wire Reverse
– must be connected to the positive contact of the rear light or to the signal of the reverse gear in
the fuse box.
It is recommended to connect the power supply using the connectors that come in the kit.
Installation recommendations
Note:
Ensure that the ground braiding connection point is securely connected. If contact is unsecure, the system can be unstable.
Summary of Contents for PA40R
