15
EN
Sensors dyeing:
•
When preparing for dyeing, remove the spacer rings from the sensors, then remove the O-rings.
•
Degrease the sensor surfaces to be dyed.
•
Dye the sensor parts.
•
The paint layer should be minimal and even.
•
Dyeing of sensors should be done with professional equipment.
•
After the paint has dried, collect the sensors.
Please note!
• A thick coat of paint reduces the sensitivity of the sensor.
• Uneven dyeing, waves on the surface, etc. may cause the system to malfunction.
• Painting the gap between the work surface and the spacer ring will result in the malfunction of the system.
Installation recommendations
System adjustment
Adjusting using the DIP switch box
To adjust the system parameters using the DIP
switch block, move the miniature switches up or
down depending on the desired setting.
The parking system can be adjusted in several ways:
•
Using an optional programmer tool Gazer PAC30 and specialized software.
•
Using the DIP switch box.
To adjust the system using the programmer tool Gazer PAC30 you need:
•
Connect the wiring of the programmer to the connector on the body of the
central unit.
•
Supply the +12V power to the programmer tool wiring.
•
Connect the USB cable from the programmer tool to the computer.
•
Configure the system using firmware.
Summary of Contents for PA40R
