Gazelle Easyflow HMS, User Manual

Page: 98 / 480

30
Easyflow HMS
event of any complaints seek medical help. These fumes
may irritate the respiratory tract.
•
Use only original Shimano chargers to charge the battery. A
fire risk cannot be ruled out if a charger is used which is not
an original Shimano unit.
•
Never connect the battery directly to a mains socket.
•
Use the battery only in combination with bicycles that have
an original Shimano drive unit. This is the only way to pro-
tect the battery against hazardous overloading.
•
Use only original Shimano batteries that have been
approved by the manufacturer of your bicycle. Use of other
batteries may result in injury and fire. If other batteries are
used no liability will be accepted and no warranty cover
provided.
•
Keep the battery and charger out of children’s reach.
•
Do not store the charger with the mains lead wrapped
round it. This could damage the mains lead or the plug.
•
If the battery is not being used, this should be stored in a
fire-proof space.
3.4.2 Charging the battery
For this, refer to ’Preparing the battery for use’, section 3.3.1
(page 20).
3.4.3 Check battery charge status
To check the battery charge status:
1. Press the battery on/off button
60
. The charge
indicator
61
indicates the battery status.
LED Signal Charge status
5 LEDs on
4 LEDs on
3 LEDs on
2 LEDs on
1 LED on
1 LED flashing
0 LED on
100-81 %
80-61 %
60-41 %
40-21 %
20-1 %
Battery flat
(battery not on the
bike)
Battery flat
(battery on the bike)
"
REMARK
" If the charge indicator gives a different
signal, remove the battery immediately and store
it in a safe place. Contact a Gazelle service
specialist.
60 61