CODE BLUE® MULTIPURPOSE |
User Guide
6 | Introduction
CAUTION: The tubing simulating veins is made of latex which may cause allergic
reactions. Users allergic or sensitive to latex should avoid direct contact with
the tubing. Seek medical attention if an allergic reaction occurs.
Storage
•
Store the simulator in a cool, dry place. Extended storage should be between 32 - 85° F (0 -
29° C). Storage above 85° F (29°C) will cause the simulator to soften and slowly warp.
•
Humidity: 40%-60% (non-condensing)
•
Do not stack or store heavy materials on top of the box.
•
Please store and ship in the case provided.
Cleaning
•
Remove all traces of lubricant at the end of each simulation session.
•
Remove the fluid using the fill kit provided.
•
Drain all the fluid from the dispensing bag and IV Arm by unclamping the drainage
tube and pumping the squeeze bulb attached to the dispensing bag.
•
Flush the fluid reservoirs and venous system with a 30:70 mix of isopropyl alcohol to water after each
day of simulation then suction all fluid out. You may also fill the dispensing bag with this mixture.
•
The simulator is “splash-proof” but not water proof. Do not submerge in water.
•
The simulator should be cleaned with a cloth dampened with diluted
liquid dishwashing soap. Do not clean with harsh abrasives.
•
Dry thoroughly after every cleaning.
Stoma Care:
•
Do not clean with alcohol or aggressive solvents.
•
Clean the stomas using a mild solution of soap and water.
•
Apply baby powder to return the surface to a skin-like feel and appearance. Reapply as needed.
•
Always remove the stomas when preparing for transport.
