CODE BLUE® MULTIPURPOSE |
User Guide
Initial Setup | 13
2.
A startup screen is shown while the OMNI®
controller detects the simulator's features.
3.
After the startup screen, the OMNI® controller
will automatically proceed to the main screen.
3.7 CONNECTING THE OMNI® CONTROLLER TO THE S303
1.
Connect the controller's communication cable
to the port on the side of the simulator.
WARNING: Do not connect the simulator or OMNI® to a computer, LAN
network or unauthorized diagnostic equipment using the communication cable
(Ethernet cable). Doing so will cause serious damage to the equipment.