Instructions for INDUS-E SERIES Industrial Door Operator
www.gatexpertstore.com
7
Step 5. Find the direction of key slot
Rotate the output shaft of the industrial door operator by pulling the hand-pulled chain
up and down until the key slot of the output shaft is fully aligned with the key slot of the
door shaft. (Note: When releasing the hand-pulled chain, make sure that the
hand-pulled chain has been reset successfully.)
Step 6. Mount the flat key and fixing sleeve
Mount the flat key, keep two fixing sleeves close to the two ends of the output shaft,
fasten the two M8 head screws in the key slot of door shaft in order to prevent the flat
key from loosening and falling off.
Step 7. Tighten the screws, prepare wiring and debugging
Tighten all screws.
