Instructions for GT1000DCL
www.gatexpertstore.com
Additional remote controls:
Spare/Additional remotes for the automatic gate kit, these will need to
be paired to the motor.
Infrared photocell:
Detects pedestrians, vehicles and objects that cross an infrared beam and
prevents the gate from closing.
Wireless keypad:
Allows secure access through the gate used with a user set code.
Wired control:
Allow users to control the opening and closing of the door through an external
push-button.
Alarm lamp:
Alerts people near the gate and users that the gate is in operation.
Technical Parameters
Model
GT1000DCL
Power supply
220V/50Hz;110V/60Hz
Motor power
170W
Gate moving speed
16-18m/min
Maximum weight of gate
800Kg
Remote control distance
≥30m
Remote control mode
Single button mode/ Three button mode
Limit switch
Spring limit switch / Magnetic limit switch
Noise
≤60dB
Working duty
S2, 20min
Recording of up remote controls
25
Frequency
433.92 MHz
Working temperature
-20°C ~ +70°C
Installation
Before You Start
·
GT1000DCL Sliding Gate Automation Kit is suitable for powering the opening and
closing motion of gates up to 800kg in weight, up to a length of 12m. (Standard kit
contains a 6m chain, if the gate length is over 5.5m, please consider to extend the length of the
chain.)
·
Gate motion is achieved by the rotating output sprocket of the gate opener driving the chain
fitted to the moving gate.
·
The gate opener requires you to press the remote control once to open, and once again to
close. This is a safety feature to ensure safe operation.
·
The gate opener itself must be fitted within private property, never externally to a property’s
boundary.
Any works done to the gate opener must be completed whilst the power is off and the opener is
unplugged. Any modifications/alterations/works to AC power components must only be completed by
a licensed electrician.
