Gateway WBR-100 Installation Manual Download Page 51

Page: 51 / 90

Chapter 4: Advanced Features and Configuration

www.gateway.com

To make detailed changes to the PC Database, click

Advanced Administration

The

PC Database (Admin)

window opens.

To edit any computer in the database, click a computer in the

Known PC’s

list, then click

Edit

. Information about the computer’s networking

configuration is shown in the

PC Properties

box.

To edit the computer configuration, make changes as required, then click

Update Selected PC

. The PC Database is updated with the new information.

To add a new computer to the PC Database, type the computer name and
network configuration information in the

PC Properties

box, then click

Add

as New Entry

. The PC Database is updated to reflect the new information.

To clear your entries in the

PC Properties

box without adding them to the

PC Database, click

Clear Form

To see a report listing all of the computers in the PC Database, click

Generate Report

. The report (see Step 3) shows the name, IP address,

physical (MAC) address, type, and DHCP client status of every computer
in the database.

Click

Standard Screen

to return to the

PC Database

window.

Summary of Contents for WBR-100



























































































Search results

Summary of Contents for WBR-100

Reviews:

Brands by name

Popular brands

Gateway WBR-100, Installation Manual

Search results

Summary of Contents for WBR-100

Reviews:

Brands by name

Popular brands