Gateway Solo 9550, User Manual

Page: 304 / 322

298
Appendix A: Safety, Regulatory, and Legal Information
www.gateway.com
European telecommunication information
(for products fitted with EU-approved modems)
Marking by the symbol indicates compliance of this equipment to the Radio and Telecom
Terminal Equipment Directive 1999/5/EC. Such marking is indicative that this equipment meets
or exceeds the following technical standards:
CTR 21 – Attachment requirements for pan-European approval for connection to the analogue
Public Switched Telephone Networks (PSTNs) of TE (excluding TE supporting voice telephony
services) in which network addressing, if provided, is by means of Dual Tone Multi-Frequency
(DTMF) signaling.
This equipment has been approved to Council Decision 98/482/EEC—“CTR 21” for
Pan-European single terminal connection to the Public Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in different countries, the
approval does not, of itself, give an unconditional assurance of successful operation on every
PSTN termination point. In the event of problems, you should contact Gateway Technical
Support.
Warning Although this equipment can use either loop disconnect
(pulse) or DTMF (tone) signaling, only the performance of
the DTMF signaling is subject to regulatory requirements
for correct operation. It is therefore strongly recommended
that the equipment is set to use DTMF signaling for access
to public or private emergency services. DTMF signaling
also provides faster call setup.