User’s Guide
55
Diskette A:
Selects the drive type.
IDE Adapter 0 master:
Note:
Do
not change these settings unless you are an advanced user!
This sub-menu configures the IDE adapter (see Figure 48). Press Enter to
access the sub-menu for this function. Press Esc when you have finished
using the sub-menu, or wish to return to the
Main
menu.
Autotype fixed disk: — Auto-detects the drive and sets all drive values to
comply with ANSI specifications.
Type: — Change from
Auto
to
User
to edit Cylinders, Heads, Sectors/
Track, etc.
32 bit I/O: — Enables or disables 32-bit data transfers.
Display device selection:
Sets the video display device. Use the Spacebar to choose between
LCD
,
CRT
or both
LCD & CRT
.
Video Mode:
Sets the TV output mode. Press the Spacebar to select
NTSC (used in North
America) or PAL.
Built-in pointing device:
Enables or disables the EZ Pad pointing device. Press the Spacebar to select
Enabled
or
Disabled
.
Memory cache:
Enables or disables external memory cache. Press the Spacebar to select
Enabled
or
Disabled
.
Boot sequence:
Sets the order in which the system searches for the boot drive. Press the
Spacebar to choose between
A: then C:
,
C: then A:
,
C: only
, or
CD-ROM
.
The system memory and extended memory fields display the actual memory
available. You cannot access and change these fields. These fields will only
change if additional memory or a larger hard drive is installed.
Press the Esc key to access the
Exit
menu and accept/discard changes. Press
F9 to return to the factory defaults, or
F10 to return to the previous settings.
Use the Right Arrow key to move over to the next screen.