User’s Guide
35
Memory
The system ships with at least 16MB of RAM. The RAM capacity can be up-
graded to 80MB by installing optional memory modules in the two expand-
able memory sockets, located on the underside of the system. These sockets
accept 8MB, 16MB or 32MB modules.
The components inside your system are extremely sensitive to electrostatic discharge,
better known as static electricity. Static electricity can cause irreparable damage to your
system; however, if you follow the
Sequential Procedure
for grounding yourself and take
note of the
Handling Precautions
, you should easily be able to avoid the possibility of such
damage occurring.
Sequential Procedure
1. Wear
a grounding wrist strap (available at most electronic stores).
2. Turn
off the system power.
3. Remove
the battery pack.
4. Remove
all the cables.
Handling Precautions
o
Never slide memory modules or other parts over any surface. Avoid static-causing
surfaces such as plastic and styrofoam in your work area.
o
Remove the part from its antistatic bag only when you are ready to use it. Do not
lay the part on the outside of the antistatic bag, as only the inside of the bag pro-
vides antistatic protection.
o
Always hold cards by their edges. Avoid touching components and edge connectors.
Preventing Electrostatic Discharge (ESD) Damage
Figure 29. Memory Module
To install a memory module:
1. Save all work.
2. Press the power button, or press and hold the power button for two
seconds if you configured the power button for Suspend/Resume mode
to turn the system completely off.
3. Close the lid.
4. Follow electrostatic discharge precautions when adding memory.
5. Disconnect the AC power.
