Gateway NV42 Series Page 195 Service Manual Download | Manualshive

Page: 195 / 200

background image

Appendix C

185

Online Support Information

This section describes online technical support services available to help you repair your Acer Systems.
If you are a distributor, dealer, ASP or TPM, please refer your technical queries to your local Acer branch

office. Acer Branch Offices and Regional Business Units may access our website. However some information

sources will require a user i.d. and password. These can be obtained directly from Acer CSD Taiwan.
Acer's Website offers you convenient and valuable support resources whenever you need them.
In the Technical Information section you can download information on all of Acer's Notebook, Desktop and

Server models including:

•

Service guides for all models

•

User's manuals

•

Training materials

•

Bios updates

•

Software utilities

•

Spare parts lists

•

TABs (Technical Announcement Bulletin)

For these purposes, we have included an Acrobat File to facilitate the problem-free downloading of our

technical material.
Also contained on this website are:

•

Detailed information on Acer's International Traveler's Warranty (ITW)

•

Returned material authorization procedures

•

An overview of all the support services we offer, accompanied by a list of telephone, fax and email

contacts for all your technical queries.

We are always looking for ways to optimize and improve our services, so if you have any suggestions or

comments, please do not hesitate to communicate these to us.

Appendix C

«
...
193
194
195
196
197
...
»

Summary of Contents for NV42 Series









































































































































































































Reviews:

No comments

Related manuals for NV42 Series

Brand: Clevo Pages: 104

Fieldmate Series

Brand: InfoCase Pages: 4

Brand: Lenovo Pages: 86

- G550 2958 NoteBook PC

Brand: Lenovo Pages: 128

Inspiron 14Z 5423

Brand: Dell Pages: 94

Brand: Gericom Pages: 117

Brand: Clevo Pages: 99

Brand: Orbic Pages: 31

Brand: Prestigio Pages: 126

Brand: Prestigio Pages: 130

Presario 1700 Series

Brand: Compaq Pages: 2

nc2400 - Notebook PC

Brand: Compaq Pages: 38

nw9440 - Mobile Workstation

Brand: Compaq Pages: 50

Brand: Targa Pages: 43

Brand: Packard Bell Pages: 21

THINKPAD P/N 39T2034

Brand: IBM Pages: 2

Brand: IBM Pages: 9

Brand: Gateway Pages: 322

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands