Gateway NV42 Series, Service Manual

Page: 38 / 200

28 Chapter 2
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
NOTE:
The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen.
Parameter Description Format/Option
System Time Sets the system time. The hours are displayed with 24-
hour format.
Format: HH:MM:SS
(hour:minute:second)
System Date Sets the system date. Format MM/DD/YYYY
(month/day/year)
Total Memory This field reports the memory size of the system. N/A
Video Memory This field shows the memory allocated for the video
graphics.
N/A
Quiet Boot Allows startup to skip certain tests while booting,
decreasing the time needed to boot the system.
Option:
Enabled
or
Disabled
Network Boot Enables, disables the system boot from LAN (remote
server).
Option:
Enabled
or
Disabled
F12 Boot Menu Enables, disables Boot Menu during POST. Option:
Enabled
or Enabled
D2D Recovery Enables, disables D2D Recovery function. The function
allows the user to create a hidden partition on hard disc
drive to store operation system and restore the system
to factory defaults.
Option:
Enabled
or
Disabled
SATA Mode Control the mode in which the SATA controller should
operate.
Option:
AHCI
or IDE
Enable Cool ‘n’
Quiet
Enables, disables Cool ‘n’ Quiet. The function reduces
the clock rate and voltage when the processor is idle for
lower power consumption and heat generation.
Option:
Enabled
or
Disabled
Item Specific Help
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F 1
E S C
Help
Exit
Select Item
Select Menu
Change Values
Select SubMenu
E n te r
F 9
F 10
Setup Default
Save and Exit
[10:49:59]
[05/03/2009]
2048 MB
[256 MB]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[AHCI Mode]
[Enabled]
[10: 49:59]
[05/03/2009]
2048 MB
[256 MB]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[AHCI Mode]
[Enabled]
System Time:
System Date:
Total Memory:
Video Memory:
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
Enable Cool ‘n’ Quiet
System Time:
System Date:
Total Memory:
Video Memory:
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
Enable Cool ‘n’ Quiet
F 5 / F 6
Phoenix SecureCode(tm) Setup Utility
Boot Exit Security Information Main Advanced