Gateway M-7301U Page 150 Reference Manual Download

Page: 150 / 164

APPENDIX

: Legal Information

142

Notices

7565 Irvine Center Drive

Irvine, CA 92618 USA

This publication is protected by copyright and all rights are reserved. No part of it may be

reproduced or transmitted by any means or in any form, without prior consent in writing from

Gateway.
The information in this manual has been carefully checked and is believed to be accurate.

However, changes are made periodically. These changes are incorporated in newer publication

editions. Gateway may improve and/or change products described in this publication at any time.

Due to continuing system improvements, Gateway is not responsible for inaccurate information

which may appear in this manual. For the latest product updates, consult the Gateway Web site

www.gateway.com

. In no event will Gateway be liable for direct, indirect, special,

exemplary, incidental, or consequential damages resulting from any defect or omission in this

manual, even if advised of the possibility of such damages.
In the interest of continued product development, Gateway reserves the right to make

improvements in this manual and the products it describes at any time, without notices or

obligation.

Trademark Acknowledgments

Gateway and the Black-and-White Spot Design are trademarks or registered trademarks of

Gateway, Inc. in the U.S. and other countries. Intel, Intel Inside logo, and Pentium are registered

trademarks of Intel Corporation. Microsoft, MS, and Windows are trademarks or registered

trademarks of Microsoft Corporation. All other product names mentioned herein are used for

identification purposes only, and may be the trademarks or registered trademarks of their

respective companies.

Macrovision statement

If your notebook has a DVD drive and an analog TV Out
port, the following paragraph applies:

This product incorporates copyright protection technology that is protected by U.S. patents and

other intellectual property rights. Use of this copyright protection technology must be authorized

by Macrovision Corporation, and is intended for home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is

prohibited.

Summary of Contents for M-7301U





































































































































































Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands

Gateway M-7301U, Reference Manual

Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands