Gateway FX6800 Reference Manual Download

Page: 143 / 154

www.gateway.com

137

Trademark acknowledgments

Gateway and the Black-and-White Spot Design are trademarks or registered trademarks of

Gateway, Inc. in the U.S. and other countries. Intel, Intel Inside logo, and Pentium are registered

trademarks and MMX is a trademark of Intel Corporation. Microsoft, MS, MS-DOS, and Windows

are trademarks or registered trademarks of Microsoft Corporation. All other product names

mentioned herein are used for identification purposes only, and may be the trademarks or

registered trademarks of their respective companies.

Macrovision statement

If your computer has a DVD-compatible drive and an analog
TV Out port, the following paragraph applies:

This product incorporates copyright protection technology that is protected by method claims

of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation

and other rights owners. Use of this copyright protection technology must be authorized by

Macrovision Corporation, and is intended for home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is

prohibited.

8511858.book Page 137 Monday, December 18, 2006 10:51 AM

Summary of Contents for FX6800



























































































































































Search results

Summary of Contents for FX6800

Reviews:

Related manuals for FX6800

Brands by name

Popular brands

Gateway FX6800, Reference Manual

Search results

Summary of Contents for FX6800

Reviews:

Related manuals for FX6800

Brands by name

Popular brands