Gateway DX4200, Reference Manual

Page: 52 / 122

CHAPTER 4: Upgrading Your Computer
46
4
Unplug the cables connected to the card reader, and
slide cables out of the clips that hold them down. Make
note of the cable locations.
5
Remove the screw that secures the card reader to the
computer, then remove the card reader.
6
Slide the new card reader into place, then secure it with
the screw you removed previously.
7
Plug the appropriate cables into the card reader.
8
Place the top bezel on top of the computer, then slide the
bezel toward the front of the computer until it clicks into
place.
9
Reinstall the front bezel by following the instructions in
“Replacing the front bezel” on page 38 .
10
Reinstall the side panels by following the instructions in
“Replacing the side panels” on page 39 .
Screw