Installing Memory and Hardware 39
6.
Firmly insert the edge of the expansion card into the slot.
Figure 17: Installing an Expansion Card
7.
After seating the card firmly, secure it to the chassis by installing the
screw you removed in Step 5 through the mounting bracket at the end
of the card.
8.
If required, connect cables to the card. (See card documentation for
proper jumper settings and cable orientation.)
9.
Close the case, as described in Chapter 1.
10.
Reconnect the power cord and turn on the system.
It may be necessary to reconfigure your system after installing some
expansion cards. You may also need to install software that came with the
card. Check the card documentation for additional information.
3436.book Page 39 Friday, August 7, 1998 10:23 AM
