Opening the System 3
Opening the System
Depending on your purpose, you may need to remove only one or all of the
system covers. Follow the instructions specific to the cover you wish to
remove as indicated in each section.
Removing the Top Cover
1.
Remove the three screws located on the rear of the system.
2.
Slide the top cover back, then pull the cover up.
3.
Set the cover aside.
Figure 1: Removing the Top and Side Covers
Caution!
Power the system OFF and
disconnect both power
cords before proceeding.
Installing any component
while the power is ON may
cause permanent damage
to the system.
3436.book Page 3 Friday, August 7, 1998 10:23 AM
