manualshive.com logo in svg

Gateway 920, User Manual, Page: 141 / 151

Share
Download
Gateway 920 User Manual Download Page 141

135

www.gateway.com

Notices

Copyright © 2003 Gateway, Inc.
All Rights Reserved
14303 Gateway Place
Poway, CA 92064 USA

All Rights Reserved

This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or 
transmitted by any means or in any form, without prior consent in writing from Gateway.

The information in this manual has been carefully checked and is believed to be accurate. However, changes are 
made periodically. These changes are incorporated in newer publication editions. Gateway may improve and/or 
change products described in this publication at any time. Due to continuing system improvements, Gateway is 
not responsible for inaccurate information which may appear in this manual. For the latest product updates, 
consult the Gateway Web site at 

www.gateway.com

. In no event will Gateway be liable for direct, indirect, special, 

exemplary, incidental, or consequential damages resulting from any defect or omission in this manual, even if 
advised of the possibility of such damages.

In the interest of continued product development, Gateway reserves the right to make improvements in this 
manual and the products it describes at any time, without notices or obligation.

Trademark Acknowledgments

1-800-GATEWAY, ActiveCPR, ALR, AnyKey, black-and-white spot design, CrystalScan, Destination, DestiVu, EZ 
Pad, EZ Point, Field Mouse, Gateway 2000, Gateway Country, gateway.net, Gateway stylized logo, Perfect 
Scholar, Solo, TelePath, Vivitron, stylized “G” design, and “You’ve got a friend in the business” slogan are 
registered trademarks and black-and-white spotted box logo, GATEWAY, Gateway Astro, Gateway@Work, 
Gateway Connected touch pad, Gateway Connected music player, Gateway Cyber:)Ware, Gateway 
Education:)Ware, Gateway Flex Case, Gateway Gaming:)Ware, Gateway GoBack, Gateway Gold, Gateway 
Learning:)Ware, Gateway Magazine, Gateway Micro Server, Gateway Money:)Ware, Gateway Music:)Ware, 
Gateway Networking Solutions, Gateway Online Network (O.N.) solution, Gateway Photo:)Ware, Gateway 
Professional PCs, Gateway Profile, Gateway Solo, green stylized GATEWAY, green stylized Gateway logo, 
Gateway Teacher:)Ware, Gateway Video:)Ware, HelpSpot, InforManager, Just click it!, Learn@Gateway, Kids 
BackPack, SERVE-TO-ORDER, Server Watchdog, SpotShop, Spotshop.com, and Your:)Ware are trademarks of 
Gateway, Inc. Intel, Intel Inside logo, and Pentium are registered trademarks and MMX is a trademark of Intel 
Corporation. Microsoft, MS, MS-DOS, and Windows are trademarks or registered trademarks of Microsoft 
Corporation. All other product names mentioned herein are used for identification purposes only, and may be the 
trademarks or registered trademarks of their respective companies.

Summary of Contents for 920
























































































































































Reviews:

No comments