Gateway 510XL, User Manual

Page: 230 / 272

222
Chapter 14: Troubleshooting
www.gateway.com
Keyboard
The keyboard does not work
■
Make sure that the keyboard cable is plugged in correctly. For more
information, see the poster that came with your computer.
■
Remove all extension cables and switch boxes.
■
Clean the keyboard by using an aerosol can of air with a narrow, straw-like
extension to remove dust and lint trapped under the keys.
■
Try a keyboard that you know works to make sure that the keyboard port
works.
■
Reinstall the keyboard device driver. For more information, see
“Reinstalling device drivers” on page 177 .
A keyboard character keeps repeating or you see a “keyboard stuck”
or “key failure” error message
■
Make sure that nothing is resting on the keyboard.
■
Make sure that a key is not stuck. Press each key to loosen a key that might
be stuck, then restart your computer.
Liquid spilled in the keyboard
■
If you spilled liquid in the keyboard, turn off your computer and unplug
the keyboard. Clean the keyboard and turn it upside down to drain it. Let
the keyboard dry before using it again. If the keyboard does not work after
it dries, you may need to replace it.
Memory
You see a “memory error” message during startup
■
Use PC Doctor or a third-party diagnostic program to help determine if a
memory module is failing. If the memory module is failing, replace it. For
more information, see
“Installing memory” on page 207 .
■
Check the memory module for correct seating and orientation. For more
information, see
“Installing memory” on page 207 .
You see a “Not enough memory” error message
■
Close all programs, then restart your computer.