Intraplex VF-40 Voice Module
Appendix A – Module Adapter for VF-40
Version 1.11
A-2
GatesAir
Intraplex Products
Warning!
Hot insertion or removal of a module adapter while a channel module is in place is not
recommended, as it could damage the channel module or the module adapter. To
remove a module adapter while the system is turned on (has power), first remove the
associated channel module. Similarly, to install a new channel module, first install the
module adapter and then install the module itself.
To install the MA-311 module adapter, perform these steps:
1.
At the rear of the chassis, insert the MA-311 into the same slot position in which the VF-40
module has been installed.
2.
Once the module adapter is seated securely, secure the unit with the screws provided.
3.
Plug the connector into the module adapter.