UNPACK CARTON
Remove crimper, pressure plate, nylon-covered hose
assembly. literature envelope, magnet, .05 Allen
wrench, and Molykote lubricant from shipping carton.
Locate the serial number assigned to the crimper on
the top front of the cylinder and record on page one
for future reference.
ATTACH CRIMPER TO THE STAND
Place crimper on flat, well- supported surface (such
as the top of a workbench or the bed of a service
vehicle) with the handle to the right.
Remove two knobs, flat washers, and spacer from
the crimper pivot bolts.
Slide the two halves of the stand together and
attach to the crimper at the pivot bolts.
Replace spacer, flat washer, and knobs. Do no
tighten knobs.
Lift crimper and allow stand to swing down onto
the surface. Tighten knobs.
LEFT SIDE
RIGHT SIDE
SPACER
1.
2.
SETUP
5
MOBILE CRIMP 4-20 SAFETY AND OPERATING MANUAL
