INSERT HOSE ASSEMBLY
from the bottom of the die
cone up through the die set.
Locate the top of the ferrule approximately 1/16”
below the top of the die set.
When crimping bent tube and block-style couplings,
keep thread end aligned with notch in pressure plate.
SWING CYLINDER INTO CRIMPING POSITION
Using the handle, swing cylinder toward you and lock
into place with lock pin.
IMPORTANT
For GS couplings, make sure the top of the
ferrule rests against the hex or round shoulder
of the coupling.
5.
OPERATING INSTRUCTIONS
MOBILE CRIMP 4-20 SAFETY AND OPERATING MANUAL
6.
13
