9/5/2007
9
▲
WARNING:
To prevent serious injury:
•
Keep away from all moving parts! If bodily contact should occur with a
moving part, immediately release CRIMP button or foot pedal.
•
Do not operate crimper with hand, fingers, or any body part in crimper mouth.
Serious injury can occur.
•
Keep additional personnel away from crimper while operating.
Using GC96 and GC32 series die sets
Fig. 1 Installing the 600 series dies into the GC96 head
Installing the GC96 600 Series and Spacer
Die Sets
A. Refer to Fig. 1. On the front of the GC96 crimper head, pull a die shoe locking pin out
with the Die Removal Tool (Prod. No 7482-9181).
B. Take the desired GC96 die segment (GC96 -610, through -614 and Spacer) and
slide the die locking pin in the crimper shoe hole with the die brand ( or part number)
facing toward the operator. Release the locking pin when the die pin is installed. Use
the same procedure on the other seven die segments.
C. If the GC96 spacer dies are installed, follow the procedure in step A. for installation.
600
Series
die or
GC96
Spacer
dies
Die
Removal
Tool
Summary of Contents for GC96
Page 22: ...9 5 2007 21 SCHEMATIC...
