The CX700 / CX560 Setup
Page 7
3:
The CX700 / CX560 Setup
The CX700 / CX560 housing requires complete and thorough setup prior to use.
CX700 / CX560 Housing Preparation
Open the CX700 / CX560 shell.
Two stainless steel safety latches secure the
housing halves. They have a positive locking feature, so to open them you must
first depress the center bar release while lifting the rear lever.
Separate
the rear half of housing from the front.
Remove the camera mount (CM).
Rotate the lock counterclockwise and slide the
mount to the rear.
Retract and Rotate controls.
Pull out the Manual Dial, Manual Button Select Dial
and Zoom ~ 1 inch or until they stop. Rotate the Power Control clockwise.
Rotate the lock to this position and
slide the CDM out of the housing.
Release the latches and separate
the housing shell halves.
Note HF-S21 housing shown.
