CX700 / CX560 Operation
Page 19
Changing Filters
The color correction filter in your housing may be changed to accommodate different
gradient filters. “Blue water” and “green water” are the two most common, recognizable
by their orange and purple color, respectively.
Removal.
The color filter is held in place by a tension screw in the filter holder.
Loosen this screw with a 1/16 Allen tool.
Installation.
Rest the filter in the holder and tighten with a 1/16 Allen tool.
Tighten
just enough to secure the filter. Do not over tighten.
Cleaning.
You will likely have fingerprints on the filter after installing, so clean the
filter according to the directions in the “Cleaning Ports and Filters” section.
Use a 1/16 Allen tool to
remove the filter from the
holder. The screw closest
to the filter is loosened.
