The CX700 / CX560 Setup
Page 9
Installing the Camera into the Housing
Carefully slide camera on its CDM
into the front housing half. The CDM will mate
and slide into the mating mount on the housing.
Observe
that the camera mates into the alignment collar at the front of the shell,
just behind the port opening.
Secure the camera
by rotating the lock clockwise until snug.
Press in controls.
When the camera is installed into the front housing half, press
in the Manual Button and Manual Dial controls to mate with the camera.
Check controls.
At this point it’s a good idea to check all controls on the front shell
for proper operation. (See section 4 for controls mentioned here.)
Open the LCD fully.
Slide camera into housing until fully forward.
Open the LCD fully.
Secure by rotating the lock
counter-clockwise.
