Gates Underwater Products
5111 Santa Fe Street, Suite H San Diego, CA 92109
858-272-2501 800-875-1052 Fax 858-272-1208 [email protected] www.GatesHousings.com
June 28, 2006
14
a
Caution:
Perform a final check after installing a port to ensure it’s flush with the
front bulkhead of the housing. If not, remove the port and reinstall. Failure to do so
may result in flooding.
Use of Diopters
• The FP44 Flat Port is designed specifically for macro video using multiple diopters
mounted to the camera lens. NOTE that you will not be able to use the color correction
filter with diopters on the camera.
Use of the Color Correction Filter
• The internal color correction filter is specially designed by UR Pro to correct for color
loss underwater. A “blue water” version (orange in color) is provided standard with the
HVX200 housing, however a “green water” version (pink in color) is available as an
option.
•
Changing the filter is accomplished by loosening the screw on the filter holder
closest to the filter element using a 7/64” allen wrench. Push element into the housing
while stabilizing the filter holder. Reverse this process to install new filter element.
• You will need to remove the filter holder when using a non-Gates wide angle
lens mounted directly on your camera. To do so, remove the screw holding the filter
holder to the filter mount block using a 7/64” allen wrench. The mount block remains
attached to the control shaft.
Insert the port with the
alignment dots at sides,
then turn clockwise
until dots align.
