GATEKEEPER SYSTEMS S31IP CAMERA FIRMWARE UPDATE.
DN2907 S31IP Camera Firmware Update Process
P a g e
|
8
The Web Interface.
Should the N9MactiveX setup program request to be installed every time the web interface is launched a
specific command must be run. To run this command press the Windows key on the keyboard (towards
bottom left) and press the letter R at the same time. This will bring up a run window. Enter CMD and press
enter, a command line window will appear, type the following command exactly as shown and then press
enter:
regsvr32 /s “c:\program files (x86)\N9MactiveX\RMN9M_DVR.ocx”
This command will manually register the required ActiveX control.
Once in the Web Interface click on the Config Tab (1).
Browse to the Firmware upgrade file as downloaded from the Gatekeeper Systems web site (2) and select
the file.
Click on Upgrade (3).
A message dialog box will appear (4) click on OK.
Once the upgrade begins a status dialog box
will appear.
The Firmware upgrade will take up to Five minutes and it is essential that power to the S31IP Camera not
be interrupted. Once the upgrade has completed you will be taken straight to Live View
