GATEKEEPER SYSTEMS S31IP CAMERA FIRMWARE UPDATE.
DN2907 S31IP Camera Firmware Update Process
P a g e
|
7
Running the Search Utility.
Allow the S31IP Camera to fully power up.
Double click on the GSI SearchDevice shortcut on the
desktop of the PC.
A warning window will appear.
Select all options to allow the software to
communicate.
Click Allow access.
In the window which now
appears note the IP address of
the S31IP Camera.
Change the settings of your
network adapter to be in the
same range as that of the discovered camera.
See the section Network Settings in the Appendix for assistance on how to do this.
Setup N9MActiveX.
The installation of N9MactiveX will require
Administrator permissions.
On the very first occasion that Open Web button is
clicked, a notification shield will appear on the
taskbar. Click on this shield and Click yes to allow
the installation of the N9MactiveX.
Follow the onscreen instructions. Depending upon
your security settings a warning message may appear at the bottom of Internet Explorer asking if you
wish to allow the N9MactiveX control to run. Click Always allow.
If this is the first time the S31IP Camera has been accessed a User screen will appear. The default
Username is admin and there is no password.
