GATEKEEPER SYSTEMS S31IP CAMERA FIRMWARE UPDATE.
DN2907 S31IP Camera Firmware Update Process
P a g e
|
11
Appendix.
Network Settings.
Once GSI SearchDevice has been run and a S31IP Camera has been detected the network adapter on the
host PC must be changed to be on the same network as the S31IP Camera. Instructions for changing
Windows 7; Windows 8.1 and Windows 10 are included. It is recommended that the current settings for the
network adapter are noted down so that the host PC can be re-set to its original values after the S31IP
Camera has been updated.
Windows 7
Open Network Connections by clicking the Start button ,
and then clicking Control Panel. In the search box, type
adapter, and then, under Network and Sharing Center, click
View network connections.
Right-click the connection that you want to change, and then
click Properties.
If you're prompted for an administrator password or
confirmation, type the password or provide confirmation.
Click the Networking tab.
Under “This connection uses the following items” highlight
Internet Protocol Version 4 (TCP/IPv4) and then click
Properties.
The Network Connection Properties dialog box will now
appear
To specify an IP address, click Use the following IP address.
connected to a Gatekeeper Systems Hybrid DVR use the
following settings:
IP address: 192.168.1.25
Subnet mask: 255.255.255.0
There is no need to change any other settings in this
window. Click OK.
You will now be on the same network as the S31IP Camera
and will be able to perform the firmware upgrade.
