G4-304SD1
User Manual & Install Guide
79 of 149
Gateway
Numeric text field allowing you to key in the IP
address of the gateway for the device.
DEFAULT SETTINGS:
Disabled/not applicable.
NOTE: THE FOLLOWING SECTION (COMM) IS ONLY APPLICABLE FOR G4-304SD1S EQUIPPED WITH
THE INTERNAL CELLULAR MODULE. GATEKEEPER DOES NOT SUPPORT THIS CONFIGURATION.
Comm
Module
Drop list which displays a list of connected
communication modules. Selecting one of
them will display the currently set configuration
values, and allow you to modify them.
These configuration values are module specific.
If you have more than one communications
module connected, you will need to select each
in turn and configure them separately.
DEFAULT SETTINGS:
Disabled/not applicable.
Server Type
This field is for display only. It automatically
displays the service type for the selected
module if it is connected to the service
provider. If not connected, then this field will
display “No Service”.
DEFAULT SETTINGS:
Disabled/not applicable.
Network Type
Drop list allowing you to select the network
type:
Mix
2G
3G
4G
DEFAULT SETTINGS:
Disabled/not applicable.
APN
Alphanumeric text field allowing you to
configure the APN value.
