G4-304SD1
User Manual & Install Guide
135 of 149
7.4
Sequential Recording (Requires Two SD Cards).
G4-304SD1 DVR supports recording video to two SD cards sequentially. The G4-
304SD1 can be configured to write video to the first SD card and when full, to continue
recording on the second SD card. This feature increases the available storage when
two SD cards are in the DVR. This feature is called “Sequential Recording”.
In order to enable Sequential Recording, the 304SD1 must be configured as follows:
Navigate to Setup>Surveillance>Record>Dual Stream
Record storage: Internal SD
Record Mode: NONE
This will enable the DVR to sequentially record.
During the changeover phase (from one SD card to the other) there will be about 15
seconds of the same video on both cards. This is done to ensure there is no loss of
video.
