G4-304SD1
User Manual & Install Guide
115 of 149
camera channels to be included in the
display and recording.
Post Recording – drop list which
allows you to select the duration for
which video will continue to be
recorded when the alarm is triggered.
Lock – checkbox, if selected will mark
the recorded video associated with this
alarm as locked video.
Linkage IO Output – checkboxes, if
enabled, the device will send a signal
to the selected IO output lines.
Output Delay Time – numeric text
field to set the delay time for the IO
output (in seconds).
Alarm Upload – checkbox, if selected
will enable the device to upload the
alarm to the center server.
Linkage Screen – drop list to select the
options to display the video from the
selected cameras on-screen when the
alarm occurs.
None : Not displayed.
Single : Display 1 camera.
Quad : Display 4 cameras.
If Single (1x1) or Quad (2x2) display is
selected, the ( Setup ) button allows
you to select the layout of the channels
to be displayed on-screen.
The drop lists are shown on-screen
accordingly to the grid layout mode
selected. You can easily choose each
individual camera channel to be
displayed in the selected grid segment
visually. If you have less cameras than
available grid segments, then those
segments associated with an actual
camera will be displayed as a black box
PB Alarm Duration – numeric text
field to set the duration of the video
playback (in seconds) when the alarm
occurs.
Alarm Snap – checkbox – if selected,
when the alarm occurs, the device will
