REVISION 2019-2
GateMotors: +44 (0)1202 744958 • Technical support: +44 (0)1202 725489
www.gatemotors.co.uk • Sales and Accessories: +44 (0)1202 717191
Installing the motor
Motor positioning
Make sure there are mechanical stops (
B
) for opening and closing.
The motor has to be fitted keeping a height above ground of between
400 mm
and
500 mm
. If the gate
is particularly light, fit the motor as close as possible to the gate centerline. The motor should not be fitted
lower than
150 mm
from ground level. And no more than
600 mm
higher than ground level.
Centreline
min height = 150 mm
max height = 600 mm
Left motor
Right motor
INWARD FACING
Check that the open position of the automated gate is not an entrapment hazard with regards
to any surrounding buildings or fixed objects and there is sufficient space for manual release.
INSTALLATION INSTRUCTION
SEQUENCE
1
Thoroughly read sections: General safety
precautions, and Intended use and application.
2
Check all the components.
3
Identify the fixing points on the pillar and on
the gate.
4
Verify measurement
D
.
5
Adjust bracket
T1
as needed.
6
Fix the motor to the bracket
T1
7
Release the motor.
8
Fix bracket
S3
to the gate.
9
Fix the motor ram to the bracket
S3
.
10
Position the cables as per the Wiring
installation overview.
11
Connect the control unit and all accessories.
12
Program the radio receiver.
13
Program the working times.
