REVISION 2019-2
KG
Use and installation of the product
must comply with Machinery
Directive 2006/42/CE.
Verify that the system is EN 124445
and EN 12453 standard compliant.
Installation must be carried out by
qualified personnel who are aware of
the associated potential hazards, and
are operating in full compliance with
current regulations.
General safety precautions
This manual contains important information for the safety of consumers.
An improper installation can result in serious injury to people and/or property.
Before beginning the installation it is absolutely necessary to read this manual in its entirety.
Save this manual for future consultation.
GateMotors: +44 (0)1202 744958 • Technical support: +44 (0)1202 725489
www.gatemotors.co.uk • Sales and Accessories: +44 (0)1202 717191
The myAster motor is designed to automate swing gates. The use
of this product for purposes other than those described above
and installation executed in a manner other than instructed in this
technical manual are prohibited.
All myAster systems are irreversible, therefore an electric lock is
not essential – but an electric lock is recommended for additional
security, or for use in areas exposed to high-winds. The electric
lock must be installed on the gate leaf that opens first and must
be connected with the terminals of the control unit.
If fitting an electric lock, remove all manual locks and bolts.
In the event of a power cut the gate motor can be released by
manual operation.
Use of the product must be restricted to its intended use. Any
other use is to be considered dangerous and therefore forbidden.
Do not allow children to play with the fixed command devices, or
in the gate’s area of operation. Keep any remote control devices
(i.e. transmitters) away from children.
Keep the gate and the gate opener regularly maintained. Use only
myGate or GateMotors supplied spare parts.
Users are strictly forbidden to carry out any changes on the gate
motor.
GateMotors is not liable for any damage resulting from improper,
wrongful or unreasonable use.
The use of this equipment must observe the safety standards in
force in the country where it is installed, as well as the standards
governing proper installation.
KG
KG
KG
KG
KG KG
KG
KG KG
KG
KG
KGKG
Any lawn watering devices
must not wet the gate
motor from the bottom up.
There is sufficient
space for manual
release.
The opening of the automated
gate is not an entrapment
hazard with regards to any
surrounding fixed parts.
Intended use and application
PRE-INSTALLATION
CHECKLIST
Verify that the technical features
fit your installation needs.
The gate hinges are in
good condition and
are suitably lubricated.
The gate leafs
swing freely and are
clear of obstruction
The gate has mechanical
stops in both the open
and closed positions.
Always cut off the power
during the installation or
maintenance of any parts.
The gates are NOT on
either an upward
or downward slope.
KG KG
KG
KG
KG
KG
KG
KG
KG
KG
