27
Liability
The manufacturer‘s warranty covers all defects in design, production and materials. All other claims are
excluded. All data and notes in this instruction are prepared with consideration to the statutory
standards and regulations. The manufacturer will not be liable for:
•
Failure to observe the instructions
•
Damages caused by inappropriate handling
•
Deployment of unqualified staff
•
Unauthorized modification
•
Technical modifications
•
Use of uncertified spare parts
Do not use the InductWarm
®
130+ appliance, if you notice damage or malfunctions. If you
are wearing a pacemaker, check with your doctor whether you are allowed to near an
induction cooking appliance.
Risks
The InductWarm
®
130+ appliance may represent a source of danger, if the information in these
operating instructions is not heeded, setup, maintenance or repair work is undertaken by non-authorized
persons, or the InductWarm
®
130+ appliance is used incorrectly or for purposes other than its intended
use. Other risk may be:
•
Risk of destruction
When the induction surface is not only being used for warming, it is necessary to ensure that the
devices are turned off. Otherwise damage or burnings may occur.
•
Electrical shock
Do not expose this system to liquids or metal objects which may cause an electric shock.
•
Environmental conditions
The system must be mounted in a clean, dry indoor place and the relative humidity must not
exceed 60%. To avoid overheating, ensure good ventilation. The environmental temperature must
not exceed 40°C.
•
Risk of burns
The used dishes are hot during operation and can cause burns. For touching the hot parts please
use potholders or gloves.
Due to back reflected heat of the dishes there can be a high temperature surface areas above the
induction area. Therefore a cooling time of five minutes must be followed.
Do not put any melting materials on the heated surface.
Because of the high temperatures which may occur and which can destroy the dish, there is a risk of
burning, when the dishes are running empty on the induction device.
