Unsuitable Dishes:
•
Pots made of copper, aluminum, heat-resistant glass and other non-metallic pots
•
Pots made of stainless steel without a magnet iron core
•
Aluminum foil and dished wrapped in aluminum foil
•
Pots that do not sit flat on the hob
Gastros recommends using InductWarm
®
porcelain in combination with InductWarm
®
200 device to keep food
warm by best quality. The heat-retaining InductWarm
®
porcelain has been provided with a specially patented
coating that allows the inductive effect to occur in the first place. The inductive effect in the warming zone
causes the underside of the porcelain to quickly warm up, thus keeping your meal warm. You can purchase
additional InductWarm
®
porcelain at any time. More information can be found on our website at:
www.gastros.swiss
•
It is essential to avoid leaving an empty induction-compatible pot dish in the warming zone.
The bottom of the dish and the warming zone could suffer damage.
•
The ferromagnetic InductWarm
®
porcelain is not suitable to be used with microwaves or with
induction warmers! In addition, avoid allowing the temperature of the porcelain to change too
quickly to prevent a risk of rupture or breakage.
The dish must be positioned in the middle of a warming zone, centering the markings (the circles) to the center of
the pot. Otherwise the pots may not be recognized by the device or receive only very little energy for warming the
dish.
Care should be taken to ensure that the glass plate is not scratched by the edges of the dish when the dish is
placed on and taken off the plate.