* KOSHA GUIDE : P-135/6-2018
Calibration must be performed at a frequency requested by the manufacturer and shall be performed quarterly
when the calibration period is not specified.
Gas & Flame
Detection System
GTD-1000Tx(M)
Instruction Manual
www.gastron.com
02
_
03
Greetings
When abnormalities occur after purchasing the
product, please contact the following address.
· Address : 23 Gunpo Advanced Industry 1-ro,
Gunpo-si, Gyeonggi-do
· Tel
: 031-490-0800
· Fax
: 031-490-0801
· URL
: www.gastron.com
We sincerely thank you for purchasing the product of Gastron Co. Ltd.
Our Gastron Co.Ltd. is a company specialized in Gas detector and Gas Monitoring System, being recognized
by many consumers due to the best quality and use convenience. We always enable you consumers to find
desired products nearby and are ceaselessly studying and striving for development of Gas detectors satisfying
customers. From now on, solve all anguishes concerning Gas detector with the products of Gastron Co. Ltd,
We Gastron Co. will take a responsibility and give you satisfaction.
In the present instruction manual, operation method for Gas detector as well as simple methods for
maintenance and repair, etc. are recorded If you read it in detail and keep it well, for reference when you
have questions, then it will give you much help.
The present product and the product manual can be changed without advance notice for performance improvement
and use convenience of the product.
■ For accurate operation of Gas detector, check up and calibrate for more than once in every 6 months.
( * In reference to KOSHA GUIDE: P-135/6-2018 / 7.2 In-house inspection, section 2 )
■ For accurate operation of Gas detector, checkup and calibration with calibration gas before
measurement is recommended.
■ When not calibrated, it may cause malfunction of the equipment due to problems resulting from
Sensor aging.
■ When the present instrument should be dismantled, those with professional skills for Gas detector
should conduct the operation.
■ For power supply cable, wire specifications should be determined by referring to the item of "Length
of installed cable".
■ For the contents on checkup and calibration of Gas detector, please use our company's engineering
department , e-mail, or web site.
