www.gastron.com
24
_
25
GTC-700
Instruction Manual
- It is stop bit setting menu.
- Use UP (▲) or DOWN (▼) key to select between 1 or 2.
- Pressing FUNC key sets the selected bit and moves to the next network setting menu.
- It is parity bit setting menu.
- Use UP (▲) or DOWN (▼) key to select between even/odd/none.
- Pressing FUNC key sets the selected bit and moves to the next network setting menu.
- When there is a change, it returns to the selected menu.
- To complete the change of setting, use UP (▲) or DOWN (▼) key in the selected menu to select
-
UP-y. If the change is not wanted, select UP-n.
- When UP-y is selected, it runs system initialization and changes to measuring mode.
- When UP-n is selected, it changes to the next menu.
- There is no change during menu setting. It displays the end of the selected menu.
- After approx. 1 sec, it moves to the initial menu for network setting.
- Pressing FUNC key for 2 sec or longer followed by password input enable menu selection.
- Using UP (▲) or DOWN (▼) key, select “nET” then press FUNC key to move to sub-menu of
-
network setting.
- Press RESET key to return to measuring mode.
- It is IP address setting menu. Pressing FUNC key moves to the IP address setting menu.
- Default setting is 192.168.1.201.
- It is the first IP address setting menu.
- Use UP (▲) or DOWN (▼) key to select between 0 ~ 255.
- Pressing FUNC key sets the selected address and moves to the next address setting menu.
- It is the second IP address setting menu.
- Use UP (▲) or DOWN (▼) key to select between 0 ~ 255.
- Pressing FUNC key sets the selected address and moves to the next address setting menu.
6.3.6. MODBUS TCP/IP Network Configuration Mode
6. Operation Method
6. Operation Method
