GPD-100 Instruction Manual
PAGE 7 of 27
Rev 1.1(2019.05.23)
4.2.
Front Panel Display part
[Figure 3. 전면 Display 구성도]
No
Name
Descriptions
1
Calibration icon
Indicating that calibration procedure is being processed.
2
Setting icon
Indicating that value setting operation is being processed.
3
Pump Icon
Pump Operation Status display
4
Test Icon
Indicating that gas detector operates in test mode.
5
Time setting Icon
It turns on when internal time is being set.
6
Setup Status Icon
It turns on when internal time is being set.
7
AC Adaptor Icon
Indicating that AC adapter connection status
8
Battery Icon
Indicating that Battery charging status
9
Measurement Unit
Indicating that current measuring unit presented on
screen.(PPM, PPM, %VOL, %LEL, mA)
10
Flow Rate
When this icon appears, measured value of flow is indicated as
10 different levels, while in normal measuring state.
11
Communication
Icon
This icon is turned on, when USB communication is being used.
12
Lock Icon
Indicating device is in lock mode. Configuration mode is not
allowed.
13
CEC Icon
Indicating that CEC operation status
14
Trouble icon
It turns on when fault is detected
15
Alarm2 icon
Indicating that 2
nd
alarm is set or detected.
16
Alarm1 icon
Indicating that 1
st
alarm is set or detected.
17
Zero, Span icon
Indicating that zero or span mode is entered during calibration
18
Gas concentration
display
It is used for displaying measured value or message to the user
