GPD-100 Instruction Manual
PAGE 23 of 27
Rev 1.1(2019.05.23)
Note 1) In case where recording/saving mode is ON, log data will be saved only when SD
card is plugged in.
Note 2) When you insert SD card with 2GB or more capacity, the SD card will not be
recognized by the device. W-04 error message will show up.
GPD-100 has only data saving function which is saving logs to SD card. It is not able to read
data through GPD-100. (It is not supported data reading function.)
It presents the currently available
capacity of external memory.
When pressing “RUN/MODE”
key, you can see total capacity of
the memory.
In case where recording/storing mode is set to ON, “Stby” message and the
setting time appear alternatively in a stand by state. Setting time is the
same as the time specified in “tImE” mode.
Total space
Available space