GPD-100 Instruction Manual
PAGE 14 of 27
Rev 1.1(2019.05.23)
Item
sub time
Description
Note
Device
Device Name
Model name of the product
F/W Version
Firmware version number
Address
Address of the device
Flow Auto
Whether or not flow auto function is
under operation
Flow Level
Setting value of flow level
CEC
Whether or not CEC is under
operation
Sensor
Gas
Measurement Gas type
Unit
Measurement unit
Range
Measurement range
Span Lev
Span level
Span Cal time
Time when span calibration has been
done
Alarm
Latch
Whether or not alarm latch mode is
under operation
Alarm1 direction
Output polarity for alarm1
Alarm1 Level
Criterion level for alarm1
Alarm2 direction
Output polarity for alarm2
Alarm2 Level
Criterion level for alarm2
Over Level
Over level of measurement
Log
Auto
Whether or not auto saving is under
operation
Start
Time when logging starts
Stop
Time when logging starts
Sample period(sec)
Logging sampling period (seconds)
Record Number
The number of measurement records
MIN
Minimum value
MAX
Maximum value
AVG
Average value
Event List
Total number of events occurred
[Table 5. Report file items description]
