USE AND CLEANING
INFORMATION
3
Control descriptions
-
Temperature indicator light (A)
-
Adjustment thermostat 0°- 90°C (B)
-
Loaded circuit breaker (C) with voltage led
-
Water drain tap (D) only for models BMV/11-21-31
Recommendations for use
Before using the machine remove, if found, the special protective film.
Unpleasant odours produced during the first minutes of operation are due to the presence of processing
grease residues.
On first use, heat the machine to the maximum temperature.
Stailess steel double boiler lunch counters use
Pour water (possibly decalcified) in the basin until a level of approximately 3 cm is reached, please notice
that it is necessary to control the water level periodically, in order to avoid serious equipment damage. The
equipment must be installed connecting the power cords to the proper sockets foreseen in the working
environment where they must be placed. To turn the machine on, press the main switch -it will light up- and
turn the thermostat knob to set the required temperature (al least 65°C); the red led will light up indicating
that the resistance is working correctly. Once the required temperature has been reached, the led will turn off
and it will turn back on when the temperature decreases enough (approximately 5° C) to justify resistance
functions.
At the end of the day, turn the main switch off, leaving the temperature set.
Only the models
BMV11, BMV21
and
BMV31
are equipped with an additional ½
"
tap that allows the water,
whichis inside the lunch counters, to overflow.
Warning:
discharge the water only when it is completely cold.
End of the day cleaning
•
Remove the plug from the electrical socket at the end of the day.
•
Accurately clean using neutral products.
•
Clean external machine parts with a damp sponge when the machine is fully cooled.
•
Do not use metallic pads and abrasive detergents.
•
To avoid hazards caused by contact with high temperature parts, only access heating parts after
maintenance operations have been completed.
Extended periods of disuse
For extended periods of disuse, turn off the main wall switch, clean the machine and cover it with a cloth to
protect if from dust.
8
Summary of Contents for TAV11
Page 31: ......
