66
ATTENTION:
Do not allow the pulp container to overfill as this may affect the operation
of the appliance (refer to disassembling instructions). Reassemble the machine to conti-
nue juicing. To minimise cleaning, line the pulp container with a plastic freezer bag to
collect the pulp. Pulp can then be used in other dishes, or as compost for the garden
or discarded.
Step 6:
There will be no pulp extracted into Pulp Container. Some fruit may be left in the juice
collector. This is normal. The amount left over will vary depending on ripeness and hard-
ness of fruit.
EMPTY THE PULP CONTAINER DURING JUICING
The pulp container can be emptied during juicing by turning the appliance ‘Off’ at the
control panel and then carefully removing the pulp container. Remove the pulp container
by tilting the pulp container slightly to the right and unlatch it from under the juicer cover
and the container support extending from under the motor base. Replace the empty pulp
container into position before continuing to juice.
OVERHEAT PROTECTION
The Juicer will automatically stop operating if the motor is stalled for more than 10
seconds. This is a safety feature. Either too much food is being processed at one time or
the pieces are not small enough. Try trimming food, cutting food into smaller pieces of
even size and or processing a smaller amount per batch. To continue juicing, reset the
appliance by pressing the ‘On/Off’ switch on the control panel to ‘Off’, then turn the
appliance back on by pressing the ‘On/Off’ switch to ‘On’.
DISASSEMBLING YOUR JUICER
WARNING:
Always turn the appliance off and pull the plug when the appliance is
not in use or when disassembling, moving or cleaning the appliance.
Step 1:
Ensure the appliance is turned off by pressing the ‘On/Off’ switch on the control panel
to ‘Off’. Then switch the appliance off at the power outlet and unplug the cord.
